AirSim Bronchi

The AirSim airway has been designed using CT DICOM data from real patients, to provide trainees with a lifelike intubation training solution. The internal airway is anatomically accurate and will guarantee 20,000+ intubation cycles when used correctly. This manikin also features bronchi to the 4th generation.

Learners will gain proficiency in the below procedures:

• Direct and video laryngoscopy
• Endotracheal intubation
• Nasotracheal intubation
• Supraglottic device insertion
• Combitube insertion
• Fibre optic intubation & examination
• Nasogastric (NG) tube insertion techniques
• Single lung isolation techniques
• Bronchoscopy techniques

• 1 AirSim Bronchi manikin ready to use (AA51100)
• 1 Carrier case
• 1 Bottle of TruCorp lubrication
• 3 Adult lung bags replicating 2 lungs and stomach
• 2 sets of adhesive pads (attachable to suction cups for increased stability if required)

Lubrication is the only consumable required for ongoing training using the AirSim Bronchi. TruCorp’s lubrication is a cost-efficient, water-soluble solution and is supplied in a 100ml bottle. Please contact our sales team to purchase.

We recommend TruCorp’s lubrication for best practice, but alternatives can be used provided they are water-soluble lubricants. Please do not use silicone-based products as they will degrade the materials.

No, this training manikin is delivered ready to use so you can begin training straight away! Simply ensure the head is in the correct position (sniffing or neutral) and generously spray the oral/nasal passages and equipment with the lubrication provided.

• Size 7.0-7.5mm ID for nasal intubation
• Size 8.0-9.0mm ID for oral intubation
• Size 3-5 for LMA laryngeal masks
• Similar respective sizes for other supraglottic devices
• Size 35F-37F for endo-bronchial tubes

Yes, if successfully intubated the two lung bags will inflate. If the airway device is incorrectly placed in the esophagus, the stomach bag will inflate.

The tongue can be inflated to simulate tongue edema. Attach an empty syringe to the red connector located near the chin and insert approx. 20ml of air.

The AirSim Bronchi manikin comes with a 1-year warranty beginning from the date of delivery.

Please contact us and provide the serial number (found under the manikin base) and an image/video of the issue. If it meets the warranty conditions TruCorp will repair free of charge. If warranty has expired, our sales team will provide a quote for repair.

Please store the manikin in clean, dry conditions away from heat and direct sunlight. Avoid contact with metals, solvents, oils or greases and strong detergents. When the product is not in use please store in the black carrier case provided.

Thoroughly wash the AirSim airway in warm water. Please use warm soapy water or similar until all visible foreign matter and residue is removed.

Mild detergents or enzymatic cleaning agents may be used on the airway at the proper dilution. The detergent must not contain skin or mucous membrane irritants.

Please do not use any of the following when cleaning the AirSim product range:
• Germicides, disinfectants, or chemical agents such as glutaraldehyde (e.g. Cidex®)
• Ethylene oxide, phenol-based cleaners, or iodine-containing cleaners

In response to the recent COVID-19 pandemic, we recommend this additional step to ensure the product is fully sanitized:

Generously spray alcohol spray or gel (minimum 75% alcohol) and wipe off. Repeat 3-4 times to fully disinfect the product. This can be done on the silicone skin and the latex airway.